Safety Anti-Scratch Blow Gun 1/4 NPT With Silent Nozzle 8 mm x 10 cm
Safety Anti-Scratch Blow Gun 1/4 NPT With Silent Nozzle 8 mm x 10 cm
Description
If the tip is blocked, a safety regulator inside the blow gun mechanism immediately blocks the pressure at the air outlet, keeping the static pressure at 29 PSI or less. Once the tip is clear, the safety regulator engages again to let the air through.
Powerful air jet and low noise level.
Anti-scratch tip, making it particularly useful for protecting delicate surfaces.
Technical Specifications
- Product Series60
- Product TypeSafety Blow Guns
- Sub-BrandAirpro
- Thrust Force (lbf)0.24
- Nominal Airflow Rate (SCFM)4.2
- Air Consumption (SCFM)4.2
- Noise Level (dB)67
- Nozzle TypeAnti-Scratch
- OSHA41 CFR 50-204.8; 29 CFR 1910.242(b); 29CFR Section 1910.95 (a)
- Hose IncludedNo
- Inlet Connection TypeThreaded
- Inlet Connection SubtypeNPT
More Information
Documents
There are no documents available.
Warranty
G10: 10 Year Warranty
The replacement warranty (G) means that the product, or parts of the product, may be replaced by a new product and/or parts or equivalent. The warranty covers any manufacturing or material defect. The warranty does not cover installation and/or removal costs incurred by the customer nor shipping costs.
Failure to comply with the technical specifications, failure to follow the guidelines in the installation guide and/or the technical sheet, inappropriate or excessive tightening, misuse and/or abuse, failure to comply with the maintenance guidelines, normal wear, contamination and/or corrosion, neglect/accident, unauthorized repair attempt and/or disassembly, alteration of the product, assembly with incompatible products.
If the product contains one or several parts with a 1-month limited warranty (GL), these parts will be excluded from the 10-year warranty (G10).
The 10-year warranty applies only to the internal mechanism.
Disclaimer
Please note that while we make every effort to accurately represent our products on our website, slight variations in design and appearance may occur due to factors such as manufacturing processes and materials used.