Aluminum Air Fuse 24 SCFM 1/4 (M) to 1/4 (F) NPT HOSEGUARD

Product #:58.952C

Safety Solution

Aluminum Air Fuse 24 SCFM 1/4 (M) to 1/4 (F) NPT HOSEGUARD

Product #:58.952C

Description

This whip check valve is a safety device designed for compressed air systems. It protects against the sudden and uncontrolled release of air caused by hose rupture or disconnection, which can create a dangerous whipping effect. In the event of a significant pressure drop, the valve immediately shuts off the air supply, reducing the risk of injury or damage. It is an essential solution for ensuring a safe work environment.
It is always recommended to test this type of product with a Topring representative to ensure it fully meets your needs and that you have selected the right solution.

Technical Specifications

Product Series58
Product TypeAir Fuses
Sub-BrandHOSEGUARD
Maximum Inlet Pressure (PSI)261
Reference Inlet Pressure For Nominal Airflow (PSI)90
Reference Pressure Drop For Nominal Airflow (PSI)5.8
Maximum Airflow (SCFM)24
Minimum Fluid Temperature (°C)-20
Maximum Fluid Temperature (°C)80
Inlet Connection TypeThreaded
Inlet Connection SubtypeNPT
Inlet Nominal Size (Imperial)1/4 in

More Information

The choice of air fuse must be made by consulting the data sheet containing the closing flow rate charts and by contacting a Topring technical advisor. All available technical information does not replace a test run under actual operating conditions. The air system should only be pressurized after rigorous testing of the valve's operation.

Documents

Instruction Manual

Warranty

G2: 2 Year Warranty

The replacement warranty (G) means that the product, or parts of the product, may be replaced by a new product and/or parts or equivalent. The warranty covers any manufacturing or material defect. The warranty does not cover installation and/or removal costs incurred by the customer nor shipping costs.

Failure to comply with the technical specifications, failure to follow the guidelines in the installation guide and/or the technical sheet, inappropriate or excessive tightening, misuse and/or abuse, failure to comply with the maintenance guidelines, normal wear, contamination and/or corrosion, neglect/accident, unauthorized repair attempt and/or disassembly, alteration of the product, assembly with incompatible products.

If the product contains one or more parts with a 1-month limited warranty (GL), these parts will be excluded from the 2-year warranty (G2).

Disclaimer

Please note that while we make every effort to accurately represent our products on our website, slight variations in design and appearance may occur due to factors such as manufacturing processes and materials used.