Technical specifications and certifications

• Solenoid certified ATEX II, cat. 2G Ex mb IIC T5, T4 Gb & 2D Ex mb tb IIIC T95C, T130C Db IP65
• Suitable for use in zones 1, 2, 21 and 22 and in non-restricted zones
• Cv: 2.00
• Port size: 3/8 (F) NPT
• 5 Ways / 2 Positions
• Type: Double solenoid
• Voltage : 110 VAC
• Manual Override: Push-Button
• Voltage Fluctuation: ±10%
• Response Time: = 25 ms
• Maximum Cycles/Minute: 300
• Working Pressure: 22 to 145 PSI
• Working Temperature: 5 to 60 °C

Material(s):
• Body, End Caps, and Manifold: Anodized Aluminum
• Seals: Oil resistant Rubber lip gaskets
• Spool: Aluminum
• Other Internal Parts: Stainless Steel, Brass, Aluminum

Features and benefits

• Solenoid manual override button shifts the valve without electrical power
• Standard connector (DIN type)
• Electrical coil can be turned 360° in 90° increments to accommodate most installation requirements
• OPTIMA air control valves offer high flow performance and reliability
• Compact size
• High flow
• Quick response
• Highly reliable spool technology
• 5 WAYS, 2 positions
• Designed for in-line or bar manifolding
• These valves can be used to provide pilot signals for larger valves

Operation and installation

HOW IT WORKS
A “momentary” electrical signal applied to one of the solenoids shifts the double solenoid valve
The valve remains in this position until a “momentary” signal is applied to the other solenoid
A “maintained” electrical signal applied alternately to the solenoids shifts the 2 positions double solenoid valve
When the signal is removed, springs return the valve to its center position