• Preset Pressure: 75 PSI +/- 10%
• Inlet/Outlet (F): 1/4 NPT
• Airflow: 25 SCFM
• Fluid: Compressed air
• Maximum Working Pressure: 260 PSI
• Working Temperature: 0 to 60 °C
Material(s):
• Body: Zinc
• Membrane: Nitrile rubber
• Ensure optimum efficiency of air tools by providing a preset pressure
• Limit overconsumption of compressed air, thereby reducing energy costs
• Highly reliable, safe and maintenance free
• Tamper-proof
• Lightweight and compact
• Heavy-duty construction
• Increase tools lifespan
TECH TIP
The ideal pressure for air tools is usually 90 PSI
Every 15 PSI of overpressure wastes from 6 to 10 % more energy
Preset regulators are an economical way to maintain ideal pressure
INSTALLATION TIP
The arrow on the regulator indicates direction of the airflow
The in-line preset energy saving miniature regulator SaveAir® can be installed in every compressed air system
It supplies a constant, exact outlet pressure regardless of the input pressure
The pressure is factory-set and cannot be changed. The SaveAir® prevents “dynamic pressure waste”
This occurs when the pressure and flow at the point of disconnection are unnecessarily higher than the data indicated by the manufacturer to accomplish the desired function
“Dynamic pressure loss” is a significant and extremely costly waste of energy
• For safe use with a non-restricted blow gun / if tip would become blocked, the static pressure will remain at less than 30 PSI
• General use with air tools, in paint shops and on compressed air networks
• Preset Pressure: 75 PSI +/- 10%
• Inlet/Outlet (F): 1/4 NPT
• Airflow: 25 SCFM
• Fluid: Compressed air
• Maximum Working Pressure: 260 PSI
• Working Temperature: 0 to 60 °C
Material(s):
• Body: Zinc
• Membrane: Nitrile rubber
• Ensure optimum efficiency of air tools by providing a preset pressure
• Limit overconsumption of compressed air, thereby reducing energy costs
• Highly reliable, safe and maintenance free
• Tamper-proof
• Lightweight and compact
• Heavy-duty construction
• Increase tools lifespan
TECH TIP
The ideal pressure for air tools is usually 90 PSI
Every 15 PSI of overpressure wastes from 6 to 10 % more energy
Preset regulators are an economical way to maintain ideal pressure
INSTALLATION TIP
The arrow on the regulator indicates direction of the airflow
The in-line preset energy saving miniature regulator SaveAir® can be installed in every compressed air system
It supplies a constant, exact outlet pressure regardless of the input pressure
The pressure is factory-set and cannot be changed. The SaveAir® prevents “dynamic pressure waste”
This occurs when the pressure and flow at the point of disconnection are unnecessarily higher than the data indicated by the manufacturer to accomplish the desired function
“Dynamic pressure loss” is a significant and extremely costly waste of energy
• For safe use with a non-restricted blow gun / if tip would become blocked, the static pressure will remain at less than 30 PSI
• General use with air tools, in paint shops and on compressed air networks