• Red with 8 mm tube x 13 cm (5")
• Noise Level at 87 PSI: 71.6 dB
• Air Consumption at 87 PSI: 6.9 SCFM
• Maximum Working Pressure: 232 PSI
• Maximum Output Thrust at 116 PSI: 0.39 lbf
• Working Temperature: -40 to 65 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Acetal plastic (POM)
• Nozzle: Plated steel/stainless steel/Aluminum
• Valve: Acetal plastic (POM)
• Springs: Stainless steel
• Seals: Nitrile rubber
• Specially designed nozzle reduces noise up to 20 dB over conventional blow guns
• Energy efficient
• If the tip of the nozzle is blocked, the airflow escapes through holes and the static pressure remains under 30 PSI
HOW IT WORKS: QUIET NOZZLE
Quiet airflow
If the tip of the nozzle is blocked, the air escapes through the side holes and the static pressure remains under 30 PSI
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas.
• For machine and woodworking shops, construction, lumber mills, paper mills, textile mills, foundries, transportation, bakeries and food processing, rubber and plastic manufacturing plants, general cleanup and maintenance
• Red with 8 mm tube x 13 cm (5")
• Noise Level at 87 PSI: 71.6 dB
• Air Consumption at 87 PSI: 6.9 SCFM
• Maximum Working Pressure: 232 PSI
• Maximum Output Thrust at 116 PSI: 0.39 lbf
• Working Temperature: -40 to 65 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Acetal plastic (POM)
• Nozzle: Plated steel/stainless steel/Aluminum
• Valve: Acetal plastic (POM)
• Springs: Stainless steel
• Seals: Nitrile rubber
• Specially designed nozzle reduces noise up to 20 dB over conventional blow guns
• Energy efficient
• If the tip of the nozzle is blocked, the airflow escapes through holes and the static pressure remains under 30 PSI
HOW IT WORKS: QUIET NOZZLE
Quiet airflow
If the tip of the nozzle is blocked, the air escapes through the side holes and the static pressure remains under 30 PSI
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas.
• For machine and woodworking shops, construction, lumber mills, paper mills, textile mills, foundries, transportation, bakeries and food processing, rubber and plastic manufacturing plants, general cleanup and maintenance