• Pour Point: -18 °C
• Grade: ISO 150 / SAE 40
• Period of use: 3000 to 4000 hours depending on the working temperature
• Size: 1 L
• High quality non-detergent mineral oil
• Maximum lubrication and components protection
• Reduced energy costs by optimizing compressor efficiency
• Extends compressor service life
• Additives that extend lubricant service life and prevent viscosity breakdown
• Prevents rust formation, carbon build-up and varnish problems
• Good resistance against oxidation and wear
• Excellent anti-foam properties
• 1 L bottles have convenient flip-up spout
TECH TIP
A lubricator uses an average of 1 L of oil every 2 to 3 months
It is recommended that a small amount of oil should be squeezed into the tool before storage
The pour point refers to the minimum temperature at which the oil continues to flow
Below the pour point, the oil tends to thicken and to cease to flow freely
• Pour Point: -18 °C
• Grade: ISO 150 / SAE 40
• Period of use: 3000 to 4000 hours depending on the working temperature
• Size: 1 L
• High quality non-detergent mineral oil
• Maximum lubrication and components protection
• Reduced energy costs by optimizing compressor efficiency
• Extends compressor service life
• Additives that extend lubricant service life and prevent viscosity breakdown
• Prevents rust formation, carbon build-up and varnish problems
• Good resistance against oxidation and wear
• Excellent anti-foam properties
• 1 L bottles have convenient flip-up spout
TECH TIP
A lubricator uses an average of 1 L of oil every 2 to 3 months
It is recommended that a small amount of oil should be squeezed into the tool before storage
The pour point refers to the minimum temperature at which the oil continues to flow
Below the pour point, the oil tends to thicken and to cease to flow freely
