• Maximum Working Pressure: 200 PSI
• Working Temperature: -9 to 99 °C
• Thread: 1 (F) NPT
• Exhaust Thread: 10-32 UNF
• Weight: 0.63 kg
Material(s):
• Body: Brass
• Ball: Chrome plated brass
• Seals: Reinforced PTFE
• Handle: Steel with PVC
• 100 % full flow port for maximum flow
• Exhausts automatically and continuously downstream air pressure as soon as turned in the closed position
• Ball valve is lockable in the closed position only, according to Part. 1910.147 Safety OSHA requirements to allow safe maintenance of the air supplied equipment
• When ball valve is open, one simple quarter turn of the handle shuts off the flow immediately
• Ball valve body includes a tapped downstream depressurization venting outlet (10-32 UNF) to direct exhaust air and assemble muffler for noise reduction
• Sturdy handle with a 8.4 mm hole for locking the ball valve with a padlock
• Vinyl coated steel handle, offering both thermal and electrical protection
• Silicone-free lubricant on all seals
• Fast, safe de-energizing of pneumatic equipment
HOW IT WORKS
When the ball valve is in the OFF position, the exhaust port vents residual air on the downstream side of the ball valve
This ensures that air-powered equipment is safe to service
Exhausts downstream air when closed
The ball valve can be locked closed to ensure system cannot be supplied by mistake
• Compressed air distribution systems
• Maximum Working Pressure: 200 PSI
• Working Temperature: -9 to 99 °C
• Thread: 1 (F) NPT
• Exhaust Thread: 10-32 UNF
• Weight: 0.63 kg
Material(s):
• Body: Brass
• Ball: Chrome plated brass
• Seals: Reinforced PTFE
• Handle: Steel with PVC
• 100 % full flow port for maximum flow
• Exhausts automatically and continuously downstream air pressure as soon as turned in the closed position
• Ball valve is lockable in the closed position only, according to Part. 1910.147 Safety OSHA requirements to allow safe maintenance of the air supplied equipment
• When ball valve is open, one simple quarter turn of the handle shuts off the flow immediately
• Ball valve body includes a tapped downstream depressurization venting outlet (10-32 UNF) to direct exhaust air and assemble muffler for noise reduction
• Sturdy handle with a 8.4 mm hole for locking the ball valve with a padlock
• Vinyl coated steel handle, offering both thermal and electrical protection
• Silicone-free lubricant on all seals
• Fast, safe de-energizing of pneumatic equipment
HOW IT WORKS
When the ball valve is in the OFF position, the exhaust port vents residual air on the downstream side of the ball valve
This ensures that air-powered equipment is safe to service
Exhausts downstream air when closed
The ball valve can be locked closed to ensure system cannot be supplied by mistake
• Compressed air distribution systems