• Thread: 1/2 (M) NPT
• Maximum Working Pressure: 500 PSI
• Working Temperature: -20 to 100 °C
• Airflow: 145 SCFM at 100 PSI inlet with 10 PSI pressure drop
Material(s):
• Body: Nickel-plated brass
• Drag Guard: Nickel-plated brass
• Valve: Brass
• Sleeve: Nickel-plated steel
• Valve Spring: Stainless steel
• Locking Mechanism: 420 Stainless steel
• Seals: Nitrile rubber
• Accept 1/2 INDUSTRIAL interchange plugs (A-A-59439)
• High performance, corrosion-resistant coupler for long service life
• Delivers high air volume with low pressure drop for better tool performance
• Drag guard protects against accidental disconnection
• Automatic push-to-connect operation
• Easy to connect, even under pressure
• Deep knurled sleeve for a better grip
• Efficient and secure connection using ball locking mechanism
SAFETY SOLUTION WITH A TWO-STEP DISCONNECTION
1. CONNECTION:
Push compatible plug into coupling and swing approximately 90° until the orange ring engages in the groove
2. DISCONNECTION:
Pull back orange ring and swing plug to stop
In order to prevent the hose from ejecting dangerously, the plug must be held in the hand until the hose is completely ventilated
• Compressed air distribution systems
• Air tools
• Thread: 1/2 (M) NPT
• Maximum Working Pressure: 500 PSI
• Working Temperature: -20 to 100 °C
• Airflow: 145 SCFM at 100 PSI inlet with 10 PSI pressure drop
Material(s):
• Body: Nickel-plated brass
• Drag Guard: Nickel-plated brass
• Valve: Brass
• Sleeve: Nickel-plated steel
• Valve Spring: Stainless steel
• Locking Mechanism: 420 Stainless steel
• Seals: Nitrile rubber
• Accept 1/2 INDUSTRIAL interchange plugs (A-A-59439)
• High performance, corrosion-resistant coupler for long service life
• Delivers high air volume with low pressure drop for better tool performance
• Drag guard protects against accidental disconnection
• Automatic push-to-connect operation
• Easy to connect, even under pressure
• Deep knurled sleeve for a better grip
• Efficient and secure connection using ball locking mechanism
SAFETY SOLUTION WITH A TWO-STEP DISCONNECTION
1. CONNECTION:
Push compatible plug into coupling and swing approximately 90° until the orange ring engages in the groove
2. DISCONNECTION:
Pull back orange ring and swing plug to stop
In order to prevent the hose from ejecting dangerously, the plug must be held in the hand until the hose is completely ventilated
• Compressed air distribution systems
• Air tools