Zinc Regulator 0 to 25 PSI 1/2 (F) NPT S50 - Discontinued

Zinc Regulator 0 to 25 PSI 1/2 (F) NPT S50 - Discontinued
Description
Superior performance.
Push-pull cap.
Maintains a constant level of pressure.
WHERE TO INSTALL A REGULATOR?
Install the regulator on each pipeline, where applications and air tools require different working pressure.
Always install the regulator downstream of a filter, but upstream of a lubricator.
Can be installed in a vertical or horizontal position.
Always install the regulator with the arrows pointing toward the tool or application.
Technical Specifications
- Product Series50
- Product TypeRegulators
- Maximum Fluid Temperature (°C)4 to 80
- Maximum Inlet Pressure (PSI)125
- Minimum Regulated Pressure (PSI)0
- Inlet Connection TypeThreaded
- Inlet Connection SubtypeNPT
- Inlet Connection GenderFemale
- Compatible FluidsAir
Documents
Warranty
R2: 2 Year Repair
The repair warranty (R) means that the product or parts of the product will be repaired or refurbished. The warranty covers any manufacturing or material defect. The warranty does not cover installation and/or removal costs incurred by the customer nor shipping costs.
Failure to comply with the technical specifications, failure to follow the guidelines in the installation guide and/or the technical sheet, inappropriate or excessive tightening, misuse and/or abuse, failure to comply with the maintenance guidelines, normal wear, contamination and/or corrosion, neglect/accident, unauthorized repair attempt and/or disassembly, alteration of the product, assembly with incompatible products.
If the product contains one or several parts with a 1-month limited warranty (GL), these parts will be excluded from the 2-year warranty (R2).
See all the solutions offered by TOPRING to repair or replace the components of filters, regulators, and lubricators (drains, elements, bowls, pressure gauges, etc).
Disclaimer
Please note that while we make every effort to accurately represent our products on our website, slight variations in design and appearance may occur due to factors such as manufacturing processes and materials used.