• Port Size: 1-1/2 (F) NPT
• Maximum Airflow at 100 PSI: 250 SCFM
• Maximum Working Pressure: 250 PSI
• Temperature Range: 4 to 52 °C
• Filtration: 0.3 micron
• Drain: Internal automatic drain
• Bowl Capacity: 3 L
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• Bowl Type: Steel
• Differential pressure gauge with easy-to-read dial face indicates pressure drop and need for filter element replacement
• Low profile allows easy filter installation
• High quality construction for durability
• Automatic drain available
INSTALLATION TIP
A coalescing filter should always be preceded by a filter or a F/R. The filter will prevent the coalescing element from quickly being saturated by larger particles.
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
• Port Size: 1-1/2 (F) NPT
• Maximum Airflow at 100 PSI: 250 SCFM
• Maximum Working Pressure: 250 PSI
• Temperature Range: 4 to 52 °C
• Filtration: 0.3 micron
• Drain: Internal automatic drain
• Bowl Capacity: 3 L
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• Bowl Type: Steel
• Differential pressure gauge with easy-to-read dial face indicates pressure drop and need for filter element replacement
• Low profile allows easy filter installation
• High quality construction for durability
• Automatic drain available
INSTALLATION TIP
A coalescing filter should always be preceded by a filter or a F/R. The filter will prevent the coalescing element from quickly being saturated by larger particles.
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application