• Port Size: 3/4 (F) NPT
• Maximum Air Flow at 100 PSI: 325 SCFM
• Maximum Pressure: 250 PSI
• Working Temperature: 4 to 66 °C
• Bowl Capacity: 0.5 L
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• High flow design
• Fillable under pressure through the fill port, no need to depressurize or remove bowl
• Proportional oil delivery over a wide range of airflow
• Precision needle valve assures repeatable oil delivery and provides simple adjustment of delivery rates
INSTALLATION TIP
The lubricator should be installed within 5 meters of the application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application
• Port Size: 3/4 (F) NPT
• Maximum Air Flow at 100 PSI: 325 SCFM
• Maximum Pressure: 250 PSI
• Working Temperature: 4 to 66 °C
• Bowl Capacity: 0.5 L
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• High flow design
• Fillable under pressure through the fill port, no need to depressurize or remove bowl
• Proportional oil delivery over a wide range of airflow
• Precision needle valve assures repeatable oil delivery and provides simple adjustment of delivery rates
INSTALLATION TIP
The lubricator should be installed within 5 meters of the application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application