• Port Size: 1-1/2 (F) NPT
• Maximum Airflow at 100 PSI: 500 SCFM
• Maximum Working Pressure: 300 PSI
• Pressure Range: ±7 PSI of supply pressure
• Working Temperature: 4 to 52 °C
• Pilot Port Size: 1/4 (F) NPT
• Pressure Gauge Port Size: 1/4 (F) NPT
• Must be used with regulator 52.325
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• Adapted for control by a remote or small distant pilot regulator. Ideal for maximum capacity requirements in applications where units are not easily accessible
• High flow performance featuring rugged design for the most demanding applications
• Ideal for installations calling for constant pressure with wide variation in flow
• Diaphragm operated design with balanced poppet and constant bleed pilot for quick and accurate regulation
• Ideal for control by a remote or small distant regulator (i.e: 52.325)
INSTALLATION TIP
Use gauge for setting reduced pressure
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
Relieving Diaph. & Valve Pilot R 1-1/4,1-1/2 HIFLO
• Port Size: 1-1/2 (F) NPT
• Maximum Airflow at 100 PSI: 500 SCFM
• Maximum Working Pressure: 300 PSI
• Pressure Range: ±7 PSI of supply pressure
• Working Temperature: 4 to 52 °C
• Pilot Port Size: 1/4 (F) NPT
• Pressure Gauge Port Size: 1/4 (F) NPT
• Must be used with regulator 52.325
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• Adapted for control by a remote or small distant pilot regulator. Ideal for maximum capacity requirements in applications where units are not easily accessible
• High flow performance featuring rugged design for the most demanding applications
• Ideal for installations calling for constant pressure with wide variation in flow
• Diaphragm operated design with balanced poppet and constant bleed pilot for quick and accurate regulation
• Ideal for control by a remote or small distant regulator (i.e: 52.325)
INSTALLATION TIP
Use gauge for setting reduced pressure
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application