• Port Size: 3/8 (F) NPT
• Maximum Airflow: 87 SCFM
• Maximum Working Pressure: 445 PSI
• Working Temperature: -10 to 70 °C
• Filtration: 5 microns
• Drain: Semi-automatic
• Bowl Capacity: 110 ml
• Replacement Element: 51.695
Material(s):
• Body Material(s): Stainless Steel
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Filter Element: Polyethylene, 5 microns
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Regulator Cap: Reinforced nylon
• Regulator Adjusting Knob: Reinforced nylon
• Diaphragm: EPDM rubber
• Poppet Valve: Brass and rubber
• Regulator Spring: Stainless steel
• Stainless steel SUS 316 body and bowl
• Compact size
• Removes water through centrifugal force
• Removes contaminants down to 5 microns in size
• Standard semi-automatic drain
• Mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
• Port Size: 3/8 (F) NPT
• Maximum Airflow: 87 SCFM
• Maximum Working Pressure: 445 PSI
• Working Temperature: -10 to 70 °C
• Filtration: 5 microns
• Drain: Semi-automatic
• Bowl Capacity: 110 ml
• Replacement Element: 51.695
Material(s):
• Body Material(s): Stainless Steel
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Filter Element: Polyethylene, 5 microns
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Regulator Cap: Reinforced nylon
• Regulator Adjusting Knob: Reinforced nylon
• Diaphragm: EPDM rubber
• Poppet Valve: Brass and rubber
• Regulator Spring: Stainless steel
• Stainless steel SUS 316 body and bowl
• Compact size
• Removes water through centrifugal force
• Removes contaminants down to 5 microns in size
• Standard semi-automatic drain
• Mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application