Prevent Hearing Loss by Using a Silent Blow Gun

Excessive noise in the workplace can cause serious hearing damage and result in lifelong hearing loss. In fact, it is today’s most common occupational disease. This is why OSHA and other Occupational Health and Safety Agencies have established standards regarding the permissible limits of daily exposure to noise.

Continuous and repeated exposure to noise levels of 90 or more dB causes partial or permanent hearing loss. Occupational noise levels are not added up; they are combined. Therefore, if two different sources generate 80 dB each, the total noise level exposure will be of 83 dB. This is why OSHA implemented new requirements to protect all workers in general industry for employers to implement a Hearing Conservation Program where workers are exposed to a time weighted average noise level of 85 dBA or higher over an 8 hour work shift. There are alternative solutions, like the use of silent blow guns to reduce noise levels and prevent hearing damage. Please refer to the table below (on the A scale of a standard sound level meter using the given data).

OSHA 29 CFR 1910.95 Occupational noise exposure standard

Silent Blow Guns: efficient preventive solution

Blow guns are used in a wide range of industries to clean, dry, and remove dust from work stations and parts within the manufacturing process. However, blow guns can contribute to high noise levels and cause occupational hearing damage. Fortunately, silent blow guns generate noise inferior to 85 dB, considered a low noise level which, is the standard required by the majority of the Provinces in Canada. Silent blow guns help prevent and reduce the number of cases of occupational hearing loss for workers that use compressed air.

Here is a selection of Topring’s safety blow guns which meet the permissible noise level standards. Click on the link to see the product info.

	AIRPRO Maximum Safety Blow Gun Description: built-in tamper-proof shut-off safety valve Noise Level at 87 PSI: 67 dBA > Go to product 60.389
	AIRPRO Silent Safety Blow Gun Description: quiet airflow and with airflow regulator Noise Level at 87 PSI: 71.6 dBA > Go to product 60.387
	AIRPRO StarTip Description:  powerful and concentrated airflow to access narrow places Noise Level at 87 PSI: 76.8 dBA > Go to product 60.357
	AIRPRO Flat Nozzle Description: concentrated flat stream of powerful air Noise Level at 87 PSI: 78 dBA > Go to product 60.381
	AIRPRO Venturi Description: increased air thrust Noise Level at 87 PSI: 79.7 dBA > Go to product 60.350

A Pharmaceutical Company’s Testimony

Operators at a pharmaceutical company used blow guns to clean dust from bins and conveyors. An assessment from the CNESST noted that the noise level exposure was greater than 95 dB.

Solution

Aware of the necessity of improving the working conditions, the company replaced its standar blow guns with TOPRING silent blow guns, thus reducing the noise level to 71.6 dB and creating a safer environment for all.

Useful links:

Canadian Occupational Safety. WSIB asking workers ‘How old are your ears?, January 27, 2017.

WSIB Ontario. Making a claim for noise-induced hearing loss, 2018.

Healthy Hearing. Top five occupations causing hearing loss, April 21, 2016.